Facile preparation and strong adhesive strength of honeycomb polyurethane films with small pore diameter

With the continuous development of bionics, such as, geckos and virginia creeper with both superhydrophobic and super-adhesive, the surface wetting and super-adhesive properties of various porous materials have attracted extensive attention of the scientific and medical communities. Here, the honeycomb polyurethane (PU) porous films with strong adhesion were successfully prepared by microphase separation method and the effects of growth parameters on their microstructure and adhesive strength to ice were investigated. It was found that a high relative humidity (e.g., 100%) and a low solution concentration (e.g., 2%) facilitated the formation of ordered honeycomb PU porous films, and as-prepared PU pores with average pore diameter as small as 5 μm are better ordered and more uniform than these in related documents. Although the contact angle of water droplets on the surface of PU porous films increased from the premodification value of 85–130° to more than 160° after surface modification with polydopamine (PDA), the corresponding rolling angle remained approximately constant (180°), indicating that the surface of PU porous films has strong adhesion similar to geckos and virginia creeper. Furthermore, at lower temperature, the PU porous films exhibited the high adhesive strength of 142.13 kPa on ice, which was strongly dependent on the porous microstructures and surface compositions. The improved adhesive behavior to ice of honeycomb PU porous films modified with PDA provides new strategies for surface modification of materials and potential applications in medical domain.     

Defect Engineering in Ambipolar Layered Materials for Mode-Regulable Nociceptor

Defect engineering represents a significant approach for atomically thick 2D semiconductor material development to explore the unique material properties and functions. Doping-induced conversion of conductive polarity is particularly beneficial for optimizing the integration of layered electronics. Here, controllable doping behavior in palladium diselenide (PdSe₂) transistor is demonstrated by manipulating its adatom-vacancy groups. The underlying mechanisms, which originate from reversible adsorption/desorption of oxygen clusters near selenide vacancy defects, are investigated systematically via their dynamic charge transfer characteristics and scanning tunneling microscope analysis. The modulated doping effect allows the PdSe₂ transistor to emulate the essential characteristics of photo nociceptor on a device level, including firing signal threshold and sensitization. Interestingly, electrostatic gating, acting as a neuromodulator, can regulate the adaptive modes in nociceptor to improve its adaptability and perceptibility to handle different danger levels. An integrated artificial nociceptor array is also designed to execute unique image processing functions, which suggests a new perspective for extension of the promise of defect engineered 2D electronics in simplified sensory systems toward use in advanced humanoid robots and artificial visual sensors.     

Lactobacillus Gasseri LGZ 1029 in yogurt: rheological behaviour and volatile compound composition

Yogurt preserves and enhances nutritional value of milk. In this study, we have compared several strains to determine the physicochemical, sensory, rheological and aroma characteristics of different yogurts. We used Lactobacillus gasseri LGZ 1029 (LG), commercial probiotic L. rhamnosus (LGG) and traditional fermentation strains Streptococcus thermophilus and L. bulgaricus (SL). Results showed that the flavour and texture characteristics of mixed-strain yogurts were obviously better than in single-strain yogurts. Addition of LG increased pseudoplastic behaviour, as shown by Herschel–Bulkley model analysis of rheological behaviour. The LG + SL group also had both the highest viscosity consistency index and thickening ability. In addition, a total of 57 volatile compounds were detected in yogurts and the fermentation with the addition of LG was mainly affected by ketones. Our study suggested that a yogurt with new attributes can be produced by using LGZ 1029.     

Preparation of iron and nitrogen co-doped carbon material Fe/N-CCM-T for oxygen reduction reaction

In this paper, iron and nitrogen co-doped carbon material with nanotube structure (Fe/N-C_CM-T) was synthesized by pyrolyzing a mixture of Fe salt, chitosan and melamine and displayed high electrocatalytic performance for oxygen reduction reaction (ORR). The structure of the Fe/N-C_CM-T was characterized and their ORR performance in alkaline media was investigated by linear sweep voltammetry, cyclic voltammetry and chronoamperometry. Fe/N-C_CM-T displayed better ORR performance than other carbon materials like Fe/N-C_C-800. The Fe/N-C_CM-800 with a large surface area (302.5 m²/g) especially exhibited the best ORR electrocatalytic performance among the prepared carbon materials, which was also proved by its similar Tafel slope (76 mV decade^?1) to Pt/C catalyst (74 mV decade^?1). Fe/N-C_CM-800 showed similar ORR activity as commercial Pt/C catalyst, but superior tolerance to methanol and stability. Such high ORR performance of the Fe/N-C_CM-T can be attributed to its nanotube structure, high specific surface area (SSA), high graphitic-N and pyridinic-N contents.     

Enhanced photocatalytic H2 evolution over In2S3 via decoration with GO and Fe2P co-catalysts

In this study, GO and Fe₂P were used as co-catalysts to improve the separation efficiency of photogenerated electron-hole pairs in an In₂S₃ photocatalyst. The metallic character of Fe₂P provided a cheap substitute for traditional noble metal co-catalyst for H₂ production in aqueous media. The GO/Fe₂P/In₂S₃ composite demonstrated significantly enhanced photocatalytic activity compared to pure In₂S₃, delivering a H₂ production rate of 483.35 μmol h^?1 g^?1 and a quantum yield was 22.68% under visible light irradiation. The design of the photocatalyst was optimized using “Design Expert” software. The analysis showed that a GO loading of 1.18 wt%, a Fe loading of 5.36 wt%, and a calcination temperature of 180 °C were optimal.     

A new perspective of co-doping and Nd segregation effect on proton stability and transportation in Y and Nd co-doped BaCeO3

Bulk and surface properties of proton stability and transportation in Y and Nd co-doped BaCeO₃ (BCYN), especially the effect of Nd segregation, were investigated by first-principles calculations. Since the structure of doped BaCeO₃ at the operating temperature of proton-conducting has been unclear for a long time, we have summarized the latest experimental results and calculated the structure of the asymmetric BCYN for the first time. The results show that compared with Y, Nd doping promotes oxygen vacancy formation, however reduces proton stability. Our calculation can also provide a possible explanation for the formation of space charge layer at the grain boundary of doped BaCeO₃ in experiment. Unlike the stable Y in BCYN, Nd is calculated to be easily segregated, which can facilitate both proton hydration and proton transportation near the surface. Moreover, Nd segregation at the grain boundary is predicted to be beneficial for proton transportation between grains.     

结构模板支撑系统安全防护架转换为外墙脚手架的施工技术

介绍了一种一次性同步搭设的模板支撑系统的安全防护架转换为后续施工砌体与装饰阶段脚手架的技术.通过采用一次性同步搭设技术,较好地解决了施工过程中的架体拉结问题,减少了管理中各种有关问题出现的影响,并减少了施工成本,值得推广应用.     

高强细晶粒钢筋与纤维增强水泥基复合材料在人防试点工程中的应用

通过高强细晶粒钢筋(HRBF500)与纤维增强水泥基复合材(FRCC)料人防框架结构试点工程,采用SATWE结构空间有限元分析设计软件和ETABS通用结构分析与设计软件对HRBF500/FRCC试点工程进行设计计算,对两类软件的计算结果进行比较发现:ETABS更接近理论值,而SATWE的安全冗余较大.对试点区现有和原有结构施工图比较发现:人防框架梁在梁高减小27％的情况下,纵向钢筋用量基本持平,配箍率增加较大;人防框架柱在截面面积不变的情况下,纵向钢筋用量减少55％,现有施工图在材料用量上的减少明显.     

有情怀 气自华——怀念我的父亲薛君玕

1982年的盛夏季节,我从浙江大学毕业,被分配到了建材研究院水泥所物化室工作,回到了我从小生长的管庄大院,成为了一名建材科技工作者,更成为了一个地地道道的"院二代"。一切都是那么的熟悉,一切又都是那么的新鲜。许多小时候认识的叔叔阿姨,现在成了师傅、同事和领导,小时候玩耍要小心出入的东楼,现在成了每天必须上班的打卡之地,小时候要混进去洗澡的试验厂澡堂,现在可以大摇大摆地进去了。